PDA

View Full Version : Never thought I would see the day....



NewsArchive
02-16-2008, 04:04 AM
Fire up your old notebook

Duel core 1.6 gb / 2gb ram

START Product: Developer Edition - Installation Authoring and Configuration
Management System
Version: 6.7.2130

Open old Project
File Save As....
Save....
BEFORE the project window refreshes.......
Click on 'Compiler Variables' .....

Program Crashes...

Kind Regards

Ben

NewsArchive
02-16-2008, 04:07 AM
The same steps seem to work fine here without any problem. And we did not
receive any similar report.

Don't know what file name you entered for "File Save As...", but I entered
"Your Project Name-2".

I have tested this on Vista Ultimate 32-bit, Vista Ultimate 64-bit, Vista
Business 32-bit, Vista Ultimate 32-bit Service Pack 1 (RTM), and Windows
Server 2008 32-bit (RTM).

BTW, you said "BEFORE the project window refreshes". What does this mean.
The IDE was still busy and you clicked the Compiler Variables Visualizer?

--
Friedrich Linder
Lindersoft
www.lindersoft.com
+1.954.252.3910

"point. click. ship" - that's SetupBuilder 6.7
Create Windows Vista ready installations in minutes

-- Official Comodo Code Signing and SSL Certificate Partner

NewsArchive
02-16-2008, 04:08 AM
BTW, perhaps it's project file specific. Would it be possible for you to
send me the project (.sb6). Then I'll try to reproduce this with your
script.

I have not opened a ticket yet.

Friedrich

--
Friedrich Linder
Lindersoft
www.lindersoft.com
+1.954.252.3910

"point. click. ship" - that's SetupBuilder 6.7
Create Windows Vista ready installations in minutes

-- Official Comodo Code Signing and SSL Certificate Partner

NewsArchive
02-16-2008, 04:09 AM
hi
Attached scrip .... I was also busy compiling with C6.3 at the same time and
checking emails in outlook, drinking coffee and reading on the chat group
about lorry drivers and girls ...:-)

Vista business 32 bits .... there was quite a delay between save as ... and
the refresh.....using bout 74% of my 2GB ram ...

Kind regards

Ben

NewsArchive
02-16-2008, 04:10 AM
Maybe this will help narrow it down.....

The 'Save As' File ...(the new one) was already saved....when i went back in
after the crash, it told me the file exists when i tried to do a new 'save
as' again, but it did not appear on the pick list ....

Kind regards

Ben

NewsArchive
02-16-2008, 04:10 AM
> Maybe this will help narrow it down.....
>
> The 'Save As' File ...(the new one) was already saved....when i went back
> in after the crash, it told me the file exists when i tried to do a new
> 'save as' again, but it did not appear on the pick list ....

Thank you. To be on the safe side, let me sum up:

1. Start IDE
2. Open "old" project file. I'll rename your Cane200823.sb6 file to
test.sb6
3. File | Save As... | Cane200823.sb6

Your next step is "Save...." now. Does it mean the IDE "saves" now or did
you
save it again (e.g. clicking the Save button).

4. You click on Compiler Variables (save process still busy?) and it
"crashes"
under Vista.

Is the above correct?

Thanks,
Friedrich

--
Friedrich Linder
Lindersoft
www.lindersoft.com
+1.954.252.3910

"point. click. ship" - that's SetupBuilder 6.7
Create Windows Vista ready installations in minutes

-- Official Comodo Code Signing and SSL Certificate Partner

NewsArchive
02-16-2008, 04:12 AM
>
> 1. Start IDE
> 2. Open "old" project file. I'll rename your Cane200823.sb6 file to
> test.sb6
> 3. File | Save As... | Cane200823.sb6
>
> Your next step is "Save...." now. Does it mean the IDE "saves" now or did
> you
> save it again (e.g. clicking the Save button).

Clicked the save button......see attached image ... after clicking the save
button on the image......click immediately on the lefthand side list inside
sb...


>
> 4. You click on Compiler Variables (save process still busy?) and it
> "crashes"
> under Vista.
>
> Is the above correct?
>

Yes

> Thanks,
> Friedrich
>
> --
> Friedrich Linder
> Lindersoft
> www.lindersoft.com
> +1.954.252.3910
>
> "point. click. ship" - that's SetupBuilder 6.7
> Create Windows Vista ready installations in minutes
>
> -- Official Comodo Code Signing and SSL Certificate Partner
>
>
>
Riebens

NewsArchive
02-16-2008, 04:13 AM
> Clicked the save button......see attached image ... after clicking the
> save button on the image......click immediately on the lefthand side
> list inside sb...

Okay, thanks!

Friedrich

NewsArchive
02-16-2008, 04:13 AM
Hi Ben,

> Attached scrip .... I was also busy compiling with C6.3 at the same time
> and checking emails in outlook, drinking coffee and reading on the chat
> group about lorry drivers and girls ...:-)

Aha, that was it. So the error is not really caused by SetupBuilder <bg>.

> Vista business 32 bits .... there was quite a delay between save as ...
> and the refresh.....using bout 74% of my 2GB ram ...

Thank you. We'll try to reproduce it. We have a Vista Business 32-bit
machine with 2GB RAM.

BTW, can you reproduce it at will with your script? Or did it only happen
once (does not make it better, of course). Haven't seen a SetupBuilder GPF
for several months now.

Thanks,
Friedrich

--
Friedrich Linder
Lindersoft
www.lindersoft.com
+1.954.252.3910

"point. click. ship" - that's SetupBuilder 6.7
Create Windows Vista ready installations in minutes

-- Official Comodo Code Signing and SSL Certificate Partner

NewsArchive
02-16-2008, 04:15 AM
No matter, open a ticket for him reading chat <bg>

> Hi Ben,
>
>> Attached scrip .... I was also busy compiling with C6.3 at the same time
>> and checking emails in outlook, drinking coffee and reading on the chat
>> group about lorry drivers and girls ...:-)
>
> Aha, that was it. So the error is not really caused by SetupBuilder <bg>.
>


--
Russell B. Eggen
www.radfusion.com
Skype Clarion chat: http://tinyurl.com/2273lm

NewsArchive
02-16-2008, 04:15 AM
>
> No matter, open a ticket for him reading chat <bg>
>

Done. Emergency ticket opened <g>

Friedrich

NewsArchive
02-16-2008, 04:16 AM
NOW you are scratching the lion's ass with a very thin twig.....

.........VBG ......

Kind Regards

Ben

NewsArchive
02-16-2008, 04:16 AM
russ... I am just joking .. the nearest lion is in a zoo here ...

and most of the trees have been chopped down areound here ....paper
plantations .....

Kind Regards

Ben

NewsArchive
02-16-2008, 04:17 AM
Whew! Thought you were calling yourself an ass there for a sec <vbg>.

--
Russell B. Eggen
www.radfusion.com
Skype Clarion chat: http://tinyurl.com/2273lm

NewsArchive
02-16-2008, 04:18 AM
yes yes yes ......

Riebens

NewsArchive
02-16-2008, 04:19 AM
Faulting application sbuilder.exe, version 6.7.2130.0, time stamp
0x47a5d77b, faulting module sbuilder.exe, version 6.7.2130.0, time stamp
0x47a5d77b, exception code 0xc0000005, fault offset 0x001d5805, process id
0xfe4, application start time 0x01c86fd85dff7160.

Yes .. I can do it at will .... see the time stamp at the bottom.....


Just be fast enough between the 'Save As' ... and clicking on ANY of the
Project Definition links on the left.....

Riebens

NewsArchive
02-16-2008, 04:20 AM
> Faulting application sbuilder.exe, version 6.7.2130.0, time stamp
> 0x47a5d77b, faulting module sbuilder.exe, version 6.7.2130.0, time stamp
> 0x47a5d77b, exception code 0xc0000005, fault offset 0x001d5805, process id
> 0xfe4, application start time 0x01c86fd85dff7160.
>
> Yes .. I can do it at will .... see the time stamp at the bottom.....
>
>
> Just be fast enough between the 'Save As' ... and clicking on ANY of the
> Project Definition links on the left.....

Aha, okay. Perfect. Then perhaps it's some kind of "timing" issue. Both
actions are running on different threads. What might happen is that the
save process is still busy and clicking on the "Compiler Variables" starts
the read (or refresh data) action. BANG.

We'll try to reproduce it. I have opened a ticket now.

Friedrich

NewsArchive
02-16-2008, 04:20 AM
> Faulting application sbuilder.exe, version 6.7.2130.0, time stamp
> 0x47a5d77b, faulting module sbuilder.exe, version 6.7.2130.0, time stamp
> 0x47a5d77b, exception code 0xc0000005, fault offset 0x001d5805, process id
> 0xfe4, application start time 0x01c86fd85dff7160.
>
> Yes .. I can do it at will .... see the time stamp at the bottom.....
>
>
> Just be fast enough between the 'Save As' ... and clicking on ANY of the
> Project Definition links on the left.....

I cannot reproduce this problem on any of our Vista 32-bit machines :-( I
even tried to click several times on the "Visualizer List", but the IDE does
not crash here.

I loaded your Cane200824.sb6 (IDE is maximized). Then "Save As..." to
Cane200825.sb6 and, as fast as I can, click an item on the Visualizer List.

In another test, I accepted the Save button in the "Save As..." dialog with
the Enter key and immediately (mouse) clicked on the Visualizer List. No
crash :-(

Hmmmm....

Friedrich

NewsArchive
02-16-2008, 04:21 AM
Ben,

Could you please try the following:

Tools | Options... | Preferences Tab

Set "Start Screen" to "General Information".

Then try to reproduce the problem again. Does it still crash?

Thanks,
Friedrich

NewsArchive
02-16-2008, 04:21 AM
That does the trick ... I can not get it to crash ..... It was on 'Default'

Switch back to 'Default' and it crashes...

Kind Regards

Ben

NewsArchive
02-16-2008, 04:21 AM
Hi Ben,

> That does the trick ... I can not get it to crash ..... It was on
> 'Default'
>
> Switch back to 'Default' and it crashes...

Okay, then it really seems to be a "timing issue". In your first
screenshot, you have selected the "Compiler Variables" tab but we still see
the (empty) "Files and Folders" view.

IMO, the IDE is busy loading file details. And that's why I can't reproduce
it here with your script. Your project does not link to valid files here on
our machines and so it cannot load the file details.

I'll analyze our source codes...

Thanks,
Friedrich

NewsArchive
02-21-2008, 03:08 AM
Ben,

Unfortunately, we were unable to reproduce this. But we have added a new
function to do "synchronization" and perhaps this helps. Am I allowed to
send you a test sbuilder.exe?

Thanks,
Friedrich

--
Friedrich Linder
Lindersoft
www.lindersoft.com
+1.954.252.3910

"point. click. ship" - that's SetupBuilder 6.7
Create Windows Vista ready installations in minutes

-- Official Comodo Code Signing and SSL Certificate Partner

NewsArchive
02-21-2008, 03:08 AM
yes....

I can still produce here 'on demand'

Kind Regards

Ben

NewsArchive
02-21-2008, 03:09 AM
Hi Ben,

> yes....
>
> I can still produce here 'on demand'
>
> Kind Regards
>
> Ben

Sent via private email. Thank you for your help.

Friedrich